ISO 9001:2015 Certified Consultancy
INDIA’S REGULATORY COMPLIANCE GATEWAY

Apply for BIS Certification & ISI Mark — With ERCS Private Limited

Get BIS Certified Without the Guesswork

ERCS Private Limited helps manufacturers and importers across Furniture, Construction Materials, Electrical Appliances, Aluminium Products, Stainless Steel Pipes & Tubes, and Fasteners secure BIS Certification under the applicable Quality Control Order (QCO) — end-to-end, with a dedicated BIS Consultant.

4.9
Google Rating
Trusted Compliance Partner For Indian & Global Manufacturers
1500+ Projects Completed
700+ Global Clients
30+ Global Locations
100+ Compliance Successes
BIS / ISI CERTIFICATION OVERVIEW

What BIS and the ISI Mark mean for your product.

BIS (Bureau of Indian Standards) is India's National Standards Body, constituted under the BIS Act, 2016. Under Section 16 of the Act, the government issues Quality Control Orders (QCOs) that make BIS Certification and the ISI Mark mandatory for specific product categories before they can be manufactured, imported, sold, distributed, or stored in India.

Once a product falls under a QCO, selling it without the ISI Mark is a punishable offence — attracting fines, product seizure, and import blocks at customs. ERCS Private Limited's BIS Consultants identify the exact IS standard your product falls under, prepare your application and documentation, coordinate factory audits and lab testing, and manage the full process through to licence grant. The BIS certification for fans / iron / oven / refrigerator and more comes under Scheme I.

ERCS PRODUCT DIAGNOSTIC

Four questions before you apply

Before starting a BIS application, these four points help determine the correct certification route.

  1. 01 Is BIS mandatory? Yes, if your product is notified under a Quality Control Order (QCO). Such products cannot be manufactured, imported or sold in India without a valid BIS licence.
  2. 02 Which Indian Standard applies? Every notified product has a specific IS number listed in its QCO. Product testing and certification are carried out as per that standard's requirements.
  3. 03 Where is the factory located? Indian manufacturers apply under the domestic route, while foreign manufacturers apply under FMCS and must appoint an Authorized Indian Representative (AIR).
  4. 04 Is the factory audit-ready? The factory needs in-house testing equipment, valid calibration records, trained QC staff and complete technical documents before the BIS inspection.
Not sure which BIS requirement applies?
Ask ERCS

Our BIS Certification Process

01

Applicability Mapping

Confirm QCO coverage, scheme, and the applicable Indian Standard.

02

Gap Assessment

Review factory capability, test equipment, and document readiness.

03

Document Preparation

Compile forms, quality control plans, test records, and technical files.

04

Application Filing

Submit on the BIS portal and send the signed copy for verification.

05

Factory Inspection

BIS officer audits the facility and seals product samples.

06

Product Testing

Sealed samples are tested at a BIS-recognized laboratory.

07

Licence Grant

BIS issues the licence and approves use of the ISI mark.

08

Aftercare

Marking guidance, surveillance support, and timely licence renewal.

BUSINESS VALUE

Benefits of BIS Certification

BIS Certification, including the ISI mark and BIS licence, enables your goods to enter the Indian market legally, creates consumer confidence and ensures compliance with Quality Control Orders (QCOs). It also helps you build your presence in government tendering systems, e-commerce, and retail in India.

Legal Access to Indian Markets

Fulfil necessary QCO obligations to manufacture, import, and distribute the notified products in India.

Product Quality Conformity

Provide proof of compliance with the relevant Indian Standard (IS) through testing and factory inspection.

Market and Tender Preparedness

Fulfil the BIS requirements of e-commerce sites, distributors, and government procurement programs.

Compliance Scalability

Create a repeatable certification process for new models, brands, and product varieties.

Reduced Delays and Rework Costs

Identify and address issues regarding product classification, testing, and documentation prior to the BIS application.

Greater Consumer Confidence

Assure buyers, partners, and regulators of your compliance position.

PRODUCT CATEGORIES WE CERTIFY

Few Applicable Categories

Ask about another product
01
FURNITURE

Furniture Industry

BIS Certification for chairs, stools, tables, desks, storage units, beds and bunk beds under IS 17631–17636 — covering work chairs, general-purpose chairs and stools, tables and desks, storage units, and beds/bunk beds.

IS 17631–17636
Know More
02
CONSTRUCTION MATERIALS

Construction Materials

  • Tile Adhesives IS 15477:2004
  • AAC Blocks IS 2185 (Part 3):1984 — Concrete-Based Building Products QCO, 2023
  • Concrete Admixtures IS 9103:1999
  • Paver Blocks (Interlocking) IS 15658:2021
Know More
03
ELECTRICAL APPLIANCES

Electrical Appliances

BIS certification for electrical appliances under IS 302 (Part 1 and applicable Part 2 sections) / IEC 60335-1 for household and commercial electrical appliances — irons, ovens, fans, refrigerators, dishwashers, food processors, heating appliances, and more. The IS 302 Certification is mandatory for manufacturers to sell their products in the Indian market.

IS 302 IEC 60335-1
Know More
04
BIS CERTIFICATION FOR ALUMINIUM PRODUCTS

BIS Certification for Aluminium Products

  • Extrusion Products (bars, rods, sections) IS 733, IS 1285, IS 5082
  • Aluminium Foil — Food Packaging IS 15392
  • Pharma Foil (Aluminium/Alloy Foil) IS 16011:2012
  • Sheets, Coils, Wire & Cans Aluminium & Aluminium Alloy Products QCO
Know More
05
STAINLESS STEEL PIPES & TUBES

Stainless Steel Pipes & Tubes

  • Seamless Pipes & Tubes IS 17875:2022
  • Welded Pipes & Tubes IS 17876:2022
  • Also referenced IS 6913

Mandatory under the Stainless Steel Pipes and Tubes (Quality Control) Order, 2025, effective 1 August 2025.

Know More
06
ENGINEERING

Fasteners

Covered under the Bolts, Nuts and Fasteners (Quality Control) Order, 2023/2024, spanning 19 fastener products across standards including IS 1363 (Parts 1–3), IS 1364 (Parts 1–2), IS 1367, IS 1284, IS 3757, IS 12427, and IS 10238 — bolts, nuts, screws, and structural fasteners for construction, automotive, and industrial use.

IS 1363 IS 1364 IS 1367 IS 1284 IS 3757 IS 12427 IS 10238
Know More
NOT SURE WHICH STANDARD APPLIES? Send us your catalogue, technical sheet or product photo.
Check My Product
DOCUMENT CHECKLIST

Documents Required for BIS Certification.

ERCS helps Indian manufacturers gather, format and validate the required documents before submission so the BIS application does not stall due to incomplete or incorrect documentation.

Request Detailed Checklist
BIS SCHEME-I / INDIAN MANUFACTURER

Core Factory Documents

  • 01 Proof of establishment (COI/Registration Certificate, MSME/Udyam Certificate)
  • 02 Factory address proof and layout plan
  • 03 Manufacturing process flow chart
  • 04 List of machinery and testing equipment
  • 05 Calibration certificates of test equipment
  • 06 Third-party/BIS-recognized lab test reports as per the applicable IS standard
  • 07 Authorisation letter (if signed by an authorised signatory)
  • 08 For foreign manufacturers: details of Indian authorised representative, nomination form, undertaking/affidavit
WHY ERCS

Why choose ERCS Private Limited?

ERCS Private Limited provides the Best BIS certification services for Domestic and Foreign clients. Our category-specific team manages ISI mark and BIS licence requirements with a clear scope, direct coordination, and ongoing compliance support.

India HQGermanyMalaysiaUAE

Category-Specific Expertise

QCO has experience in furniture, construction materials, electrical appliances, aluminium, stainless steel, and fasteners.

Direct Coordination

Coordination with the BIS Regional Office and Testing Laboratories accredited by the BIS.

Transparent Consulting Fees

Clearly defined scope of work and fixed consulting fee.

Support on Renewals and Amendments

Continuous support in renewal, amendment, and surveillance audit.

Pan-India & FMCS Service

Service to Indian Manufacturers and foreign applicants through FMCS.

Single Point Contact at BIS

Single point of contact for applicability check to license issuance.

OUR TEAM

Meet Team ERCS

Our experienced team of BIS consultants and compliance experts supports you at every step, from application to licence grant.

ERCS Private Limited team
PROVEN CREDENTIALS

Our Achievements

Quality-led consulting, active industry participation and a commitment to making complex certification journeys clear and manageable.

Quality
Assured

BUILT ON PROCESS. MEASURED BY TRUST.

Compliance support backed by a quality-first approach.

ERCS combines structured documentation, technical coordination and responsive client support for manufacturers entering or expanding in the Indian market.

ISO 9001:2015Certified consultancy
Industry PresenceTube & Pipe Fair, New Delhi
End-to-End SupportApplication through licence grant
Dedicated ExpertsOne point of coordination
ERCS ISO 9001:2015 certificate
01

ISO 9001:2015 Certification

Certified for compliance management & brand representation services, reflecting our commitment to consistent quality standards.

ERCS Tube and Pipe Fair participation certificate
02

Tube & Pipe Fair 2025

Recognised for our participation at the International Exhibition & Conference for the Tube & Pipe Industry, Pragati Maidan, New Delhi.

GLOBAL CLIENT NETWORK

Trusted by 700+ Popular Brands Globally

Brand 01
Brand 02
Brand 03
Brand 04
Brand 05
Brand 06
Brand 07
Brand 08
Brand 09
Brand 10

Supporting manufacturers and global organizations with BIS Certification, ISI Mark, FMCS and Indian regulatory compliance.

CLIENT EXPERIENCE

What Our Clients Say

Manufacturers value ERCS for clear communication, technical guidance and structured support throughout the BIS certification journey.

Client Experiences
“
ERCS has consistently supported our BIS certification work with knowledgeable guidance and prompt responses.
KW
Konrad Wagner Germany
“
The ERCS team helped us navigate a complex BIS process with strong attention to detail and practical support.
DR
Delphine Roux France
“
Their understanding of BIS requirements made our certification process considerably easier to manage.
RD
Ronald Davis International Client
“
ERCS provided clear guidance at every stage and helped our team prepare efficiently for the BIS factory inspection.
MS
Michael Schmidt Germany
“
Professional communication, practical technical advice and excellent coordination throughout our certification project.
JL
Julien Laurent France
“
ERCS supported our documentation and audit preparation thoroughly, making the complete BIS process much more structured.
AL
Andrew Lee Singapore
“
We appreciated the technical expertise and responsiveness of the ERCS team during our BIS certification journey.
TK
Thomas Keller Switzerland
“
The team provided excellent assistance with documentation, testing requirements and communication throughout the project.
SM
Sarah Miller United Kingdom
“
A reliable compliance partner with strong technical understanding and professional coordination from start to finish.
JP
James Parker International Client
ERCS KNOWLEDGE SERIES

How BIS / ISI Certification Works

A practical overview for Indian manufacturers looking to understand BIS applicability, Indian Standards, Quality Control Orders, factory inspection, product testing and the final licence grant process.

Applicability & IS Standard Mapping
Application & Documentation
Factory Audit & Product Testing
BIS Licence & ISI Mark
Discuss Your BIS Requirement

OUR SUCCESSFUL BIS AUDITS

PREPARING FOR A BIS FACTORY AUDIT? Let ERCS review your factory readiness before inspection.
Prepare My Factory
COMMON QUESTIONS

Before you begin.

Still unsure which standard applies? Send us your product catalogue or technical data sheet.

Ask a technical question

BIS Certification is the licensing process under the Bureau of Indian Standards; the ISI Mark is the certification mark granted once your product passes testing and factory audit against the applicable IS standard.

If your product category falls under a Quality Control Order (QCO) — as most Furniture, Construction Materials, Electrical Appliances, Aluminium, SS Pipe, and Fastener categories now do — certification is mandatory before manufacturing, importing, or selling in India.

Yes. Foreign manufacturers generally use the FMCS route for Scheme-I products and nominate an Authorized Indian Representative. ERCS supports AIR documentation, factory-audit preparation, testing and application coordination.

Typically 4–8 weeks for Indian manufacturers, depending on testing and audit scheduling; foreign BIS-certified manufacturers under FMCS may take longer.

The scope may include government fees, testing, audit-related expenses and professional service fees. Model grouping, factory location and technical readiness can materially affect the total.

Yes. ERCS supports test planning, documentation, equipment-readiness review, audit preparation and coordination through the applicable certification route.

Yes — ERCS supports renewals, amendments, and surveillance audit compliance as a BIS license consultant.
ERCS PRIVATE LIMITED

Ready to Get BIS/ISI Certified?

Talk to an ERCS BIS Consultant in India today.

Get a Free Consultation with a BIS Certification Agency Now
START WITH CLARITY

Tell us what you manufacture or import.

Our first response will focus on three things: whether certification is applicable, the likely scheme and the documents needed to move forward.

Call consultation desk+91 90766 11766 Email your product detailsinfo@elitasrcs.com
India headquartersGround Floor, B 18, Block B Sector 1, Noida (UP) India - 201301
FREE CONSULTATION

Request a product assessment

Call WhatsApp
Call Expert Free Assessment